| Description | Part No. |
| Bottomshell Ar | 452.2043-901 |
| Hydroset cylinder Ar | 452.1964-901 |
| Pinionshaft housing | 452.2007-901 |
| Mainshaft Ar | 452.4305-901 |
| Topshell Ar | 452.3336-901 |
| Feed hopper Ar | 452.3620-901 |
| Hoses and protection | 442.9484-901 |
| Over pressure blower unit, electric, installation crusher | 452.3697-901 |
| Bottom Shell | 452.0642.901 |
| Foot alt. | 452.3720-901 |
| Inspection cover | 442.7201-90 |
| Stud screw,SMS1460,M12x45 | 843.1267 |
| Washer BRB 13×24 HB200 ISO 7089 | 847.0147-00 |
| Lock nut M12 8 FZB ISO 7040 | 845.0030-00 |
| Liner-Pin Shaft Arm | 452.0317-901 |
| Liner-Narrow Arm | 452.0314-901 |
| Bend | 442.9396-00 |
| Flange SAE 3000 4” | 900.2199-00 |
| Screw M6S 16×60 8.8 FZB ISO 4017 | 840.0070-00 |
| Washer BRB 17×30 HB2001S0 7089 | 847.0016-00 |
| O-ring 109,5×3 SMS 1586 | 873.0129-00 |
| Sc祯ew M6S M30x110 8.8 ISO4014 | 840.0693-00 |
| Washer BRFB 31×58 HB 200 | 847.0125-00 |
| Bottom shell bushing | 442.9248-01 |
| Swivel branch tee adapter 3/4′ | 900.0921-00 |
| Adapter 314” | 900.0655-00 |
| Tredo Nr.20 3/4” | 873.0385-00 |
| Wearing Plates | 452.0313-905 |
| Pin CP m6 12×30 SMS 2374 | 853.0464-00 |
| Eccentric wearing plate | 442.9249-02 |
| Pin Prym N 16×45 | 853.0646-00 |
| Foot | 452.1064-001 |
| Foot | 452.1064-001 |
| Foot | 442.9749-01 |
| Rubber compression mountings for crusher | 442.9650-00 |
| Damper SAW 300B | 864.0079-00 |
| Screw M6s 20×35 8.8 1S0 4017 | 840.1135-00 |
| Washer BRB 21×36 HB200 SS 3576 | 847.0132-00 |
| Fixing plate | 442.5904-01 |
| Rubber compression mountings for crusher on subframe | 442.9874-91 |
| Damper SAW 300 A | 864.0066-00 |
| Screw M6s 20×35 8.8 1SO 4017 | 840.1135-00 |
| Washer BRB 21×36 HB 200 IS0 3576 | 847.0132-00 |
| Screw M6s 20×60 8.8 1S0 4017 | 840.0078-00 |
| Fixing plate | 458.0553-00 |
| Spacer | 458.0554-01 |
| Washer BRB 53×92 HB200 SS 70 | 847..0142-00 |
| Lock nut M48 8 FZB DIN 985 | 845.0274-00 |
| Eccentric | 442.9245-01 |
| Eccentric bushing alt. | 452.3609-901 |
| Hub | 442.9246-01 |
| Ring | 442.9274-00 |
| Screw M6S 16×50 8.8 ISO 4017 | 840.0068-00 |
| Washer BRB 17×30 HB200 ISO 7089 | 847.0016-00 |
| Key R 28x16x320 | 442.9469-01 |
| Screw Mc6s 16×60 12.9 | 841.0036-00 |
| Screw MC6S 16×60 | 841.0032-00 |
| Washer DIN 137 B 17×30 | 847.0181-00 |
| Gear and pinion set alt. | 452.2051-901 |
| Key T50x28x90 | 442.9275-01 |
| Eccentric bushing 24+28+32+36 | 442.9357-01 |
| Eccentric bushing 36+40+44+48 | 442.9358-01 |
| Eccentric bushing 48+52+56+60 | 442.9359-01 |
| Eccentric bushing 60+64+68+70 | 442.9360-01 |
| Gear and pinion set 50Hz | 442.9639-00 |
| Dust Collar | 442.9307-01 |
| Screw M6s M16x30 fzb ISO 4017 | 840.0064-00 |
| Ring | 442.9309-01 |
| Pin CP m6 12×30 SMS 2374 | 853.0464-00 |
| Washer BRB 17×30 HB200 ISO 7089 | 847.0016-00 |
| Screw M6S 16×70 8.8 ISO 4014 | 840.0072-00 |
| Screw M6S 16×70 H 8.8 | 840.0943-00 |
| Locating bar | 442.9308-02 |
| Shim t=0.1 | 442.9362-01 |
| Shim t=0.5 | 442.9362-02 |
| Shim t=0.7 | 442.9362-03 |
| Shim t=1.0 | 442.9362-04 |
| Screw MC6S 10×50 8.8 FZB | 841.0256-00 |
| Gasket | 442.9363-01 |
| Inner dust seal ring | 442.9310-01 |
| Hydroset cylinder | 442.9980-01 |
| Screw M6S 30×200 10.9 Dacromet 500 LC | 840.1176-00 |
| Washer BRB 31×56 HB 305 | 847.0310-00 |
| Hydroset cylinder bushing | 442.9256-01 |
| Screw M6S 10×16 8.8 ISO 4017 | 840.0032-00 |
| Washer BRB 10,5×22 HB200 SS 3576 | 847.0144-00 |
| Piston assy | 442.9743-00 |
| Pin CP 30m6x70 SMS 2374 | 853.0988-00 |
| Step bearing set | 452.2631-901 |
| Chevron packing | 442.9257-00 |
| Packing clamp plate | 442.9304-01 |
| Screw MC6S 12×30 8.8 FZB | 841.0267-00 |
| Hydroset cylinder cover | 442.9255-01 |
| “Plug VSTI R1/2””-ED” | 900.2302-00 |
| Screw M6S 30×260 10.9 | 840.1177-00 |
| Air bleeder UV121 | 902.0605-00 |
| O-ring 706.5×5.7 SMS 15686 | 873.1233-00 |
| O-Ring 759,0×5,7 SMS 1586 | 873.1210-00 |
| O-ring 810,0×8,4 SMS 1586 | 873.1211-00 |
| Hydroset system As | 452.3619-901 |
| Protection plug | 919.0190-00 |
| Adapter D180x123 | 442.9369-01 |
| Position sensor EDS-630–SR | 984.0476-00 |
| O-ring 44,2×3 SMS 1586 | 873.0111-00 |
| Screw MC6S 8×40 8.8 FZB | 841.0239-00 |
| Washer BRB 21×36 HB200 SS 3576 | 847.0132-00 |
| Screw M6S 20×60 8.8 ISO 4017 | 840.0078-00 |
| O-ring 89,5×3 SMS 1586 | 873.0237-00 |
| Pinion Shaft Housing | 442.9806-01 |
| Gasket t=0.5 | 442.9364-01 |
| Gasket t=0.8 | 442.9364-02 |
| Gasket t=1.5 | 442.9364-03 |
| Bearing 32230 J2 | 868.0832-00 |
| Lock washer MB 30 | 847.0299-00 |
| Wear ring | 442.9809-01 |
| Locking Nut KM 30 150×2 ISO 2982 | 845.0164-00 |
| Spacer | 442.9334-01 |
| Spacer | 442.9808-01 |
| Oil Seal Ring Type 4 170x200x15 | 873.1219-00 |
| O-ring 139.3×5.7 SMS 1586 | 873.0136-00 |
| Bearing cover inner | 442.9261-01 |
| Bearing cover, outer | 442.9260-01 |
| Screw M6s 12×35 8.8 ISO 4017 | 840.0046-00 |
| Washer BRB 13×24 HB2001S0 7089 | 847.0147-00 |
| Screw M6s 20×60 8.8 ISO 4017 | 840.0078-00 |
| Washer BRB 21×36 HB200 SS 3576 | 847.0132-00 |
| Gasket t=0.8 | 442.9365-01 |
| Spring Pin Prym N 8×28 | 853.0590-00 |
| Pinion shaft | 442.9807-01 |
| Plug SR 1010 KS | 900.2388-00 |
| Key T 32x18x115 SMS 2307 | 857.0360-00 |
| Key T 36x20x140 SMS 2307 | 857.0354-00 |
| EIbow 3/4 A4 SMS 435 | 900.0022-00 |
| Screw SK6SS 20×25 | 842.0020-00 |
| Oil level gauge | 442.9346-01 |
| Seal ring TREDO 26 | 873.0387-00 |
| Retaining ring SgA 140 | 855.0030-00 |
| Screw M6S 16x120H 8.8 | 840.1063-00 |
| Nut M6M M16 8 FZB ISO 4032 | 845.0009-00 |
| Washer TBRSB 26×65 | 847.0063-00 |
| Screw M6S 24×100 8.8 ISO 4014 | 840.0672-00 |
| Gasket t=0.5 | 442.9366-01 |
| Adapter 3/4” | 900.0655-00 |
| Straight adapter G 1 B -11 | 900.0656-00 |
| Seal Tredo 23 | 873.0386-00 |
| Mainshaft Assembly | 452.4291-901 |
| Main shaft sleeve | 442.9294-01 |
| Pin CP 30m6x70 SMS 2374 | 853.0988-00 |
| Retaining Ring Sga 100 SS1581 | 855.0026-00 |
| Mantle alt. | 452.2061-901 |
| Head nut | 442.9270-01 |
| Inner head nut | 442.9269-01 |
| Burning ring | 442.9306-01 |
| Dust seal ring | 442.9271-01 |
| Retaining ring | 442.9272-01 |
| Retainer | 442.9367-01 |
| Scraper | 442.9368-01 |
| Washer BRB 17×30 HB200 ISO 7089 | 847.0016-00 |
| Screw M6S 16×55 8.8 IS0 4017 | 840.0069-00 |
| Screw M6S 16×80 8.8 ISO 4014 | 840.0074-00 |
| Casting compound (kg) | 831.0016-00 |
| Mantle HC | 442.9758-01 |
| Mantle B | 442.9339-01 |
| Mantle A | 442.9314-01 |
| Mantle EF | 452.0264-001 |
| Top shell | 452.3319-001 |
| Screw M6S 42×320 8.8 4014 | 840.1175-00 |
| Nut M6M M42 8 FZB ISO 4032 | 845.0322-00 |
| Washer BRB 43×80 HB 200 SS 3576 | 847.0171-00 |
| Washer | 442.9979-01 |
| Protective Cap SW65 2 H20 | 899.0278-00 |
| Screw | 442.9530-03 |
| Arm shield alt. | 452.3759-901 |
| Lubrication Nipple AH R 1/4” | 914.0093-00 |
| Pipe bushing | 900.0142-00 |
| Pipe 28×1.5 SMS1890 | 452.4029-001 |
| Compression fittings GE 28-LR | 900.0437-00 |
| Spider cap | 452.0266-001 |
| Air Filter P10102 R1/4” | 912.0114-00 |
| Nipple 1/4 1S049 N8 | 900.0169-00 |
| Elbow 1/4 IS049 A1 | 900.0002-00 |
| Steel Pipe DIN 2391/C-ST 35,4 10×1,5 | 452.3952-001 |
| Compression fittings GE 10-LR | 900.0425-00 |
| O-ring 790.0×5.7 SMS 1586 | 873.1232-00 |
| Screw M6S 20×100 8.8 ISO 4014 | 840.0653-00 |
| Washer BRB 21×36 HB200 SS 3576 | 847.0132-00 |
| Spider bushing | 442.9266-01 |
| Temperature Sensor TRPF | 191.2376-00 |
| Connection Box 75x80x57 | 191.2365-00 |
| Elbow 1/4 ISO49 D4 | 900.0075-00 |
| Steel Pipe DIN 2391/C-ST 35,4 10×1,5 | 452.3950-001 |
| Screw M6s 20×90 8.8 ISO 4017 | 840.0652-00 |
| Seal ring / Scraper | 452.0418-001 |
| Ring | 452.0417-001 |
| Support ring | 452.0419-001 |
| Screw MC6S 6×45 8.8 FZB | 841.0225-00 |
| Plug BSPT 1” hexagon | 900.0981-00 |
| Concave alt. | 452.3531-901 |
| Casting compound (kg) | 831.0016-00 |
| Filler ring alt. | 452.3474-901 |
| Screw M6S 30×360 8.8 | 840.1115-00 |
| Block | 452.1068-001 |
| Shim | 442.7252-01 |
| Shim | 442.7252-02 |
| Shim | 442.7252-03 |
| Shim | 442.7252-04 |
| Hose 31,510,6 L=245 | 442.8908-02 |
| Washer BRFB 31×58 HB 200 | 847.0125-00 |
| Wearing plate alt. | 452.4033-901 |
| Screw M6S 36×540 8.8 | 840.1136-00 |
| Lock Nut M6MN 36 8 | 845.0273-00 |
| Sleeve | 442.9353-01 |
| Washer | 442.9354-01 |
| Disc Spring 100x51x6 | 863.0015-00 |
| Support ring | 442.9313-01 |
| Dowel Pin | 442.8290-01 |
| Casting compound (M) | 452.2077-001 |
| Casting compound (M) | 452.2078-001 |
| Casting compound (EC) | 452.2085-001 |
| Arm shield | 452.0514-001 |
| Arm shield | 442.9265-00 |
| Concave ring C | 442.9398-01 |
| Concave ring MF | 442.9312-01 |
| Concave ring MC | 442.9471-01 |
| Concave EFX | 452.1067-001 |
| Concave EF | 452.0263-001 |
| Concave EEF | 452.0579-001 |
| Concave ring EC | 442.9336-01 |
| Concave ring M | 442.9337-01 |
| Filler ring M | 442.9338-00 |
| Filler ring MF | 442.9332-00 |
| Filler ring MC | 442.9520-00 |
| Wearing plate assy | 452.4034-901 |
| Protection screws | 452.4035-901 |
| Segment support (cone) | 442.9738-00 |
| 442.9740-00 |
| 442.9739-00 |
| Screw | 840.0069-00 |
| Washer | 847.0016-00 |
| Lock nut | 845.0215-00 |
| Screw M6S 16×25 | 840.0634-00 |
| Rubber segment | 442.9744-00 |
| 442.9746-00 |
| 442.9745-00 |
| Rubber plug | 873.1287-00 |
| Screw M6S 16×55 | 840.0071-00 |
| Washer BRB 17×30 | 847.0016-00 |
| Lock nut M16 | 845.0215-00 |
| Pilot valve block | 902.0851-00 |
| Main valve | 902.0850-00 |
| Adapter D180x123 | 442.9369-01 |
| O-ring 89,5×3 SMS 1586 | 873.0237-00 |
| Screw M6s 20×60 8.8 ISO 4017 | 840.0078-00 |
| Washer BRFB 21×36 | 847.0132-00 |
| Posotion sensor EDS-630-1-SR | 984.0476-00 |
| O-ring 44,2×3 SMS 1586 | 873.0111-00 |
| Screw MC6s 8×40 8.8 fzb | 841.0239-00 |
| Seal kit for DBDS10K1X/100 | 902.0849-00 |
| Seal kit for LC80DB40E-6X/004 | 902.0806-00 |
| Gasket ring for LC80DB40E-6X/004 | 902.0825-00 |
| Pilot valve 6.0 Mpa | 902.0852-90 |
| Bushing R1 1/2”ED-1/4” | 900.2291-00 |
| Measuring nipple 1/4” | 900.2292-00 |
| Spring for LC80 DB20 E/D6X 2 bar | 902.0846-00 |
| Screw MC6S 24×120 10.9 fzb | 841.0558-00 |
| Bracket | 442.9499-00 |
| Plate | 442.9495-01 |
| Support | 442.9502-01 |
| Bar | 442.9497-01 |
| Bar | 442.9496-00 |
| Bar | 442.9496-90 |
| Bar | 442.9498-01 |
| Wearing liner | 442.9501-00 |
| Wearing liner | 442.9501-90 |
| Hose SAE 100 R2AT 2”x2000 | 442.9494-00 |
| Hydraulic hose | 442.9492-01 |
| Hydraulic hose | 442.9491-01 |
| Hose SAE 100 R2AT 1”x2100 | 442.9490-01 |
| Straight adpter G 2 B .11 | 900.0659-00 |
| Straight adapter G 1 B -11 | 900.0656-00 |
| Adapter 3/4” | 900.0655-00 |
| Rubber cloth | 442.9500-01 |
| Bolt | 442.9503-01 |
| Nut Lock ISO 7040 M16 8 FZB | 845.0215-00 |
| Washer BRB 17×30 HB200 ISO 7089 | 847.0016-00 |
| Screw M6S 16×60 8.8 FZB ISO 4017 | 840.0070-00 |
| Washer BRB 17×30 HB200 ISO 7089 | 847.0016-00 |
| Nut Lock ISO 7040 M16 8 FZB | 845.0215-00 |
| Screw M6S 12×70 8.8 ISO 4017 | 840.0053-00 |
| Washer BRB 13×24 HB200 ISO 7089 | 847.0147-00 |
| Lock nut M12 8 FZB ISO 7040 | 845.0030-00 |
| Distribution pipe | 442.6176-01 |
| Bar | 442.9505-01 |
| Protection | 442.9507-00 |
| Screw M6S M16x30 fzb ISO 4017 | 840.0064-00 |
| Washer BRB 17×30 HB200 ISO 7089 | 847.0016-00 |
| Screw M6S M16x30 fzb ls0 4017 | 840.0064-00 |
| Washer BRB 17×30 HB200 IS0 7089 | 847.0016-00 |
| Adapter G3/4” BxG 112”B | 900.0647-00 |
| Seal Tredo 23 | 873.0386-00 |
| Hose SAE 100 R1AT R 3/4”x1000 | 650.0089-18 |
| Hose SAE 100 R1AT R 1” x1000 | 650.0090-18 |
| Screw M6s M10x60 8.8 fzb ls0 4014 | 840.0041-00 |
| Flange | 442.9508-01 |
| Socket 4” | 900.0317-00 |
| Nut M6M M10 8 FZB ISO 4032 | 845.0006-00 |
| Washer BRB 10,5×22 HB200 SS 3576 | 847.0144-00 |
| Screw M6s M16x30 fzb ISO 4017 | 840.0064-00 |
| Washer BRB 17×30 HB200 ISO 7089 | 847.0016-00 |
| O-ring | 873.0132-00 |
| Tee adapter | 900.2277-00 |
| Sleeve | 900.2200-00 |
| Reducer Rl G 1’ x 1/4’ | 900.2696-00 |
| Measuring nipple 1/4” | 900.2292-00 |
| Hose SAE 100 R2AT 1”x1200 | 442.9553-01 |
| Hose 31,5-0,6 248225 | 819.0061-00 |
| Rubber cloth | 442.9696-01 |
| Rubber cloth | 442.9697-01 |
| Seals Tredo 30 | 873.0390-00 |
| Seal Tredo 18 | 873.0384-00 |
| Screw M6S 12×55 8.8 ISO 4014 | 840.0050-00 |
| Hose SAE 100 R2AT 1”x1200 | 442.9553-01 |
| Subframe | 458.0390-00 |
| Rubber strip 2254 50×30 L=2,0 m | 873.0718-00 |
| Washer BRB 53×92 HB200 SS 70 | 847.0142.00 |
| Lock nut M48 8 fzb DIN 985 | 845.0274-00 |
| Screw M6s 48×180 8.8 ISO 4014 | 840.1117-00 |
| Intermediate shaft with coupl | 930.0273-00 |
| Pump P115+B0x | 930.0265-00 |
| Shims t=1 mm | 458.0406-01 |
| Shims t=0,5 mm | 458.0406-02 |
| Shims t=0,3 mm | 458.0406-03 |
| Washer BRB 37×68 HB200 ISO 7089 | 847.0162-00 |
| Lock nut M6MN 36 8 | 845.0273-00 |
| Screw M6s 36×180 8.8 ISO 4014 | 840.0718-00 |
| Rubber damper | 442.9650-91 |
| Guard | 458.0396-00 |
| Screw M6S 20×90 8.8 ISO 4017 | 840.0967-00 |
| Nut M6M M20 8 fzb lSO 4032 | 845.0010-00 |
| Rail for seal streap | 458.0772-00 |
| Sensor without speed monitor | 458.0451-00 |
| Support | 458.0452-01 |
| Screw M6S M8x20 8.8 fzb ISO 4017 | 840.0021-00 |
| Washer BRB 8,4×16 ISO 7089 | 847.0012-00 |
| Sensor SlH-3010-BPKG | 984.0217-00 |
| V-belt=SPC | 453.0546-00 |
| V-belt=8V | 453.0546-90 |
| V-belt=8V | 453.0546-91 |
| V-belt=SPC | 453.0546-92 |
| V-belt=8V | 453.0546-93 |
| V-belt=8V | 453.0546-94 |
| Foot 1306-02 | 442.9749-01 |
| Frame | 458.0363-00 |
| Screw M6S 24×100 8.8 ISO 4014 | 840.0672-00 |
| Washer BRB 25×45 HB200 SS 3576 | 847.0124-00 |
| Nut lock DIN 985 M24 8 fzb | 845.0216.00 |
| Foot | 452.1064-001 |
| Screw M6S M30x110 8.8 ISO 4014 | 840.0693-00 |
| Washer BRFB 31×58 HB 200 | 847.0125.00 |
| Frame | 453.0545-00 |
| Slide rall | 458.0773-01 |
| Screw M6s M36x130 8.8 fzb lSO 4017 | 840.1038-00 |
| Washer BRB 37×68 HB 200 ISO 7089 | 847.0162.00 |
| Lock nut M6MN 36 8 | 845.0273-00 |
| Frame with driving, 990 rpm, SPC | 458.0530-00 |
| Washer BRB 37×68 HB 200 ISO 7089 | 847.0162-00 |
| Lock nut M6MN 36 8 | 845.0273-00 |
| V-belt guard | 453.0497-00 |
| Washer BRB 13×24 HB 200 ISO 7089 | 847.0147-00 |
| Lock nut M12 fzb lSO 7040 | 845.0030-00 |
| Screw M6s 12×45 8.8 ISO 4017 | 840.0048-00 |
| Seal strip 100×60 L=1000 | 873.1231-00 |
| Rubber damper | 442.9650-00 |
| Washer BRB 37×68 HB200 ISO 7089 | 847.0162-00 |
| Lock nut M6MN 36 8 | 845.0273-00 |
| Screw M6S 36×180 8.8 ISO 4014 | 840.0718-00 |
| Rubber damper | 442.9650-91 |
| Guard | 458.0396-00 |
| Screw M6S 20×90 8.8 ISO 4017 | 840.0967-00 |
| Nut M6M M20 8 fzb ISO 4032 | 845.0010-00 |
| Rail for seal streap | 458.0772-00 |
| Sensor without speed monitor | 458.0155-00 |
| Bracket | 458.0156-00 |
| Screw M6S M8x20 8.8 fzb lso 4017 | 840.0021-00 |
| Washer BRB 8,4×16 ISO 7089 | 847.0012-00 |
| Sensor SlH-3010-BPKG | 984.0217-00 |
| V-belt=SPC | 458.0530-00 |
| V-belt=8V | 458.0530-90 |
| V-belt=8V | 458.0530-91 |
| V-belt=SPC | 458.0530-92 |
| V-belt=8V | 458.0530-93 |
| V-belt=8V | 458.0530-94 |
| Motor frame | 458.0305-00 |
| Shims t=0,3 mm | 458.0406-03 |
| Shims t=0,5 mm | 458.0406-02 |
| Screw M6S 36×180 8.8 ISO 4014 | 840.0718-00 |
| Washer BRB 37×68 HB200ISO 7089 | 847.0162-00 |
| Lock nut M6MN 36 8 | 845.0273-00 |
| Screw M6S 20×60 8.8 ISO 4014 | 840.0078-00 |
| Coupling RB 2,15 D=110/120 | 930.0262-00 |
| Key T 28x16x110 SMS 2307 | 857.0336-00 |
| Screw SK6SS 16×40 | 842.0019-00 |
| Shaft 1672-00 D 11h8x1043 | 458.0348-00 |
| Spacer 2134-01 | 458.0307-01 |
| Bearing housing SN 3024 | 458.0349-01 |
| Roller bearing 23024 CCKW33 | 868.0829-00 |
| Clamping sleeve H 3024 | 868.0830-00 |
| Guide ring FRB 10/180 | 871.0110-00 |
| Felt seal FS 460 | 873.1289-00 |
| V-ring V-110A | 873.0898-00 |
| Cover end 346186123 | 871.0404-00 |
| Screw M6s 24×100 8.8 ISO 4014 | 840.0672-00 |
| Screw M6S 24×150 8.8 ISO 4014 | 840.0677-00 |
| Washer BRB 25×45 HB200 SS 3576 | 847.0124-00 |
| Nut lock DIN 985 M24 8 fzb | 845.0216-00 |
| Protective cap for shaft | 458.0531-00 |
| Washer BRB 13×24 HB200 ISO 7089 | 847.0147-00 |
| Lock nut M12 8 fzb ISO 7040 | 845.0030-00 |
| Screw M6S 24×50 8.8 ISO 4017 | 840.0665-00 |
| Supporting cleat 16×16 L=100 | 649.0168-04 |
| V-belt Pulley 710 MGT 160 16xSPC | 879.0588-00 |
| Bushing MGT NR 160 Ø140 | 869.0305-00 |
| V-belt Pulley 710 MGT 160 16xSPC | 879.0587-00 |
| Bushing MGT NR 160 Ø 110 | 869.0308-00 |
| Key 28x16x140 SMS 2306 | 857.0356-00 |
| V-belt SPc 8000 | 875.0254-00 |
| Washer | 442.9342-01 |
| Spacer 2172-03 Ø158/140,5×94 | 442.9343-01 |
| Washer BRB 21×36 HB200 SS 3576 | 847.0132-00 |
| Screw M6S 20×50 8.8 ISO 4017 | 840.0077-00 |
| Washer BRB 37×68 HB200 ISO 7089 | 847.0162-00 |
| Lock nut M6MN 36 8 | 845.0273-00 |
| Screw M6s 36×180 8.8 ISO 4014 | 840.0718-00 |
| Rubber damper | 442.9650-91 |
| Guard | 458.0396-00 |
| Screw M6s 20×90 8.8 ISO 4017 | 840.0967-00 |
| Nut M6M M20 8 fzb ISO 4032 | 845.0010-00 |
| Rail for seal streap | 458.0772-00 |
| Over pressure blower unit with el. motor | 452.3693-901 |
| Over pressure blower SV 5.133/1 | 452.1168-901 |
| Malleable cast iron bussing 1 1/2×374 ISO 49 | 900.0154-00 |
| Hose coupling 3/4 | 900.1424-00 |
| Pneumatic hose, PVC, 1” 15m | 819.0187-00 |
| Wrought iron pipe fittings socket 3/4” | 900.0275-00 |
| Clips 28 SMS 2298 | 900.1358-00 |
| Air filter FK200 | 912.0219-00 |
| Over pressure blower unit, pneumatic droven | 452.3727-901 |
| Nipple lSO49 N8 1/2×114 | 900.0180-00 |
| Air filter 504-2S 5 Micron | 912.0113-00 |
| Nipple 1/4 ISO 49 N8 | 900.0169-00 |
| Regulator 216-2-8 | 902.0645-00 |
| Nipple lSO 49 N8 314×114 | 900.0182-00 |
| Clips 28 SMS 2298 Dy 23-27mm | 900.1358-00 |
| Pneumatic hose PVC 1” | 819.0187-00 |
| Hose coupling 3/ | 900.1424-00 |
| Wrought iron pipe fittings socket 3/4” | 900.0275-00 |
| Over pressure blower SV 5 13371 | 452.1169-901 |
| Over pressure fan | 906.0494-00 |
| Motor Alt | 452.4436-00 |
| Screw M6S M8x20 8.8 fzb ISO 4017 | 840.0021-00 |
| Motor lEC71-2 IM3001 400VY50 0.55kW | 972.1164-00 |
| Motor lEC71-2 IM3001 525V50 0.55kW | 972.1165-00 |
| Motor lEC71-2 IM3001 550V50 0.55kW | 972.1166-00 |
| Motor lEC71-2 IM3001 575V50 0.55kW | 972.1167-00 |
| MotorlEC71-2 IM3001 575V60 0.55kW | 972.1168-00 |
| Motor lEC71-2IM3001 200V50 0.55kW | 972.1169-00 |
| Motor lEC71-2 IM3001 440V50 0.55kW | 972.1170-00 |
| MotorlEC71-2 IM3001 460V50 0.55kW | 972.1171-00 |
| MotorIEC71-2 IM3001 400VD50 0.55kW | 972.1172-00 |
